Product Description

The Elcometer 130 Salt Contamination Meter quickly and accurately measures the level of soluble salts on surfaces.

 Fast reading rate allows multiple tests to be completed efficiently

Pressure plate ensures a constant and uniform pressure to paper

Automatic detection of paper size and automatic adjustment of reading value

USB and Bluetooth® data output to ElcoMaster™ 2.0 software

Dust and water resistant rugged design equivalent to IP64

Automatic temperature compensation ensures accurate results

Non-oxidising gold plated contacts ensures lifetime accuracy

Stores up to 150,000 readings in 2,500 alpha numeric batches

Fully portable hand-held, ergonomic design ideal for use in the field

130 large screen no stats 130 run graph ppm 130 stats  tare

Large colour LCD screen displays readings in µg/cm², ppm, µS/cm, mS/cm, 

% salinity or mg/m²

On-screen run graph shows last 20 measurement values

Offset calibration allows use of non-pure water

 User Friendly

Large buttons ideal for gloved hands

Easy to use menus in multiple languages

High and low reading limit indicators

Factory calibrated for immediate use

 Accurate

Conductivity measurement to ±1%

Can be used in accordance with National and International Standards

Automatic temperature compensation ensures repeatable, accurate results

Calibration verification tiles

Trend and batch readings graph formats for instant on-screen analysis

Reliable

Repeatable and reproducible measurements

2 year gauge warranty

Supplied with fully traceable Test Certificates

Batch & individual readings are stored with date and time stamp, temperature and size of test paper

Tough

Heavy duty, impact resistant, dust and waterproof design equivalent to IP64

Wipe clean sealed unit ideal for harsh environments

Scratch and solvent resistant display

Efficient

Instant readings allows multiple tests to be completed efficiently

Alpha numeric batch identification

Compatible with ElcoMaster™ 2.0 and ElcoMaster™ Mobile App

Powersave mode with 'tap awake' feature

Calibration offset allows the use of non-pure water up to 2μg/cm².

Powerful

Measuring range up to 50μg/cm² (3000ppm)

USB and Bluetooth® data output

Stores up to 150,000 readings in 2,500 batches

Soluble salt and conductivity meter in one gauge

 elcometer-130-calibration-tiles

Calibration Verification Tiles available for verifying the accuracy of the gauge

How to use a Salt Contamination Meter

130 drawing 1

Fill the syringe with 1.6 ml of high purity water.

Note: Non-pure water (up to 2µg/cm²) can be automatically offset with the gauge.

130 drawing 3

Eject the 1.6ml on to a clean unused sample paper, taking care to retain all the water on the paper.

130 drawing 4

Place wetted paper on to the area under test, pressing firmly into contours and irregularities to remove any entrapped air.  

Start the timer on the gauge. Whilst waiting for the sample time to elapse, additional tests can be prepared.

130 drawing 2

After 2 minutes, remove the paper from the surface and place it on to the gold-plated electrodes.

130 drawing 5

Close the lid, ensuring that the magnetic catch is fully engaged.  

The reading will automatically be displayed and stored into memory together with paper size, temperature, date and time.

130 drawing 6

Half size or quarter size papers can be used for testing on small surfaces.

Paper size is automatically detected by the Elcometer 130 and the reading calculated automatically.