Mã sản phẩm: Ma1 | Đã đọc: 1
Nhà sản xuất: SEL-EU
Hạt phun sắt cạnh mài màu màu đen SEL được phân phối bởi MECO Công ty vật tư Thiết bị Việt Nam
When the scouring power of shot isn’t enough, the sharp, angular structure of Super Steel Grit offers the raw cutting power to clean a wide variety of surfaces and part.
Advantages of Super Steel Grit
200 to 1000 times recyclable, depending on hardness, velocity, type of job and carry out losses.
Versatile - can be used on Wheel Blast Machines and Pressure Operated Blast Systems.
High Density and strength for fast blast rate and low dust
Super Steel Grit is manufactured according to the International Standards SAE J444 and SAE J827
Available Sizes of Super Steel Grit:
G10 G12 G14 G16 G18 G25 G40 G50 G80 G120
Profile
GP Super Steel Grit, (46-50HRC) GP Super Steel Grit rounds off rapidly in use and is particularly suited for removing sand of casting and scaling oxide.
GL Super Steel Grit, (56-60HRC) GL Super Steel Grit is harder than GP Steel Grit. It loses sharpness during operation and is suited for plate and section preparation.
GH Super Steel Grit, (60-66HRC) GH Super Steel Grit has maximum hardness to maintain angularity during operation and provides a constant cutting (etching) action. GH Super Steel Grit is specifically designed for Air Blast Operations.
Characteristics
GP Super Steel Grit, (46-50HRC) GL Super Steel Grit, (56-60HRC) GH Super Steel Grit, (63-65HRC)
Bulk Density: >7.4g/cm3 >7.4g/cm3 >7.4g/cm3
Grain Shape: Angular Angular Angular
Microstructure: Homogeneous tempered Martensite and Baintite Homogeneous tempered Martensite and Baintite Homogeneous tempered Martensite and Baintite
Hardness: 46-50 HRC 56-60 HRC 60-66HRC
Packaging:
In 55lb bags; 2200 lb sacs; Steel drums.
Hạt sắt cạnh - Steel Grit -